POLEPOX PVC ADHESIVE - MASTER
Single component, polymer emulsion, fast curing, highly flexible and water-based floor covering adhesive providing maximum bonding strength.
POLEPOX PVC ADHESIVE MASTER is an adhesive prepared using special acrylic polymer emulsions that provides high shear and adhesion strength, excellent trowel ability, fast adhesion/grabbing, low odor, easy to clean, solvent-free, single component, water-based, "wet set" or "transitional pressure sensitive" application methods, especially formulated for many flexible flooring installations. It is used in bonding vinyl, LVT (Luxury Vinyl tiles), PVC, linoleum, carpet, felt-backed linoleum and cork floor coverings as well as in commercial applications with high traffic, in bonding sports floor coverings, in bonding rubber and vinyl coverings to stair treads.
CONSUMPTION
Application Method Average Consumption A2 Trowel (Smooth back surface) 250 - 350 g/m2 B1 Trowel (Rough back surface) 300 - 350 g/m2
AREAS OF USE
- Suitable for bonding all flexible floor coverings.
- Can be used on properly prepared concrete, plywood, cement board and radiant heat systems.
- Bonding LVT (Luxury Vinyl Tile) coverings.
- Bonding PVC floors and wall coverings.
- Bonding PVC to PVC in renovations.
- Bonding linoleum coverings.
- On smoothed subfloors.
- For indoor use only.
SPECIFICATIONS
- It has extraordinary adhesion strength.
- It provides excellent results for heavy traffic and rotating loads.
- It is suitable for curved floors and wall coverings with its high adhesion feature.
- It is easy to apply with a trowel or roller.
- It is solvent-free.
- It has a short opening time to traffic.
- Low VOC.
- It is suitable for underfloor heating systems.
APPLICATION AND SURFACE PREPARATION
- The surface to be applied must be solid, flat, smooth, dry and free from previous adhesive residues, mold oil, dust, oil or other contaminants.
- Mechanical grinding and scraping should be used to remove contaminants.
- Do not use on wet, dusty, dirty or brittle surfaces.
- Do not use on surfaces/boards treated with joints or curing compounds.
- Do not use in areas subject to hydrostatic pressure.
- Do not allow heavy traffic or heavy loads for at least 24 hours.
- Before applying to rubber stair treads, lightly sand the entire base and tread and wipe with alcohol to remove any dirt that may prevent proper adhesion.
TECHNICAL SPECIFICATIONS
| Parameter | Value |
|---|---|
| pH | 6.5 - 7.5 |
| Form | Cream Cake |
| Open Time Wet Bonding | 10 - 15 mins |
| Pressure Sensitive Contact Adhesive | 25 mins |
| Density | 1.42 gr/cm3 |
| Opening to Traffic | 24 hours |
| Full Curing | 72 hours |
| Color | Light Yellow-Gray |
- Packing: 15 kg in plastic packaging.
- Cleaning: Tools and equipment are cleaned with water.
- Shelf Life: Can be stored for at least 12 months in dry, unopened original packaging at temperatures of 0-25°C. Protect from freezing conditions.
ATTENTION
-
-
-
-
For high-strength surfaces that combine aesthetics,
