POLEPOX-AQUA UV 1K
Accrylic-based, one-component liquid plastic coating and elastic waterproofing material. It forms a seamless, elastic layer upon drying.
PLACES OF USE
- Beveled surfaces coated with concrete, plaster, cement board, galvanized, zinc, aluminum, PVC, polyester, and wood.
- Insulation of roofs and terraces.
- Waterproofing of exterior facades of buildings.
- Insulation of details such as cracks, eaves, and chimney bottoms.
ADVANTAGES AND FEATURES
- Ready for use; easily applied with a brush or roller.
- Low labor cost.
- 500% elastic.
- Effective water vapor permeability.
- High resistance to UV rays.
- Maintains flexibility at low temperatures.
- Can be painted over.
APPLICATION DETAILS
Surface Preparation: Cement-based surfaces must be firm, dry, load-bearing, dust-free, and clean. The surface should be thoroughly cleaned of all oils, greases, rust, and paraffin residues that weaken adherence; no loose particles should remain.
Application:
- Mix: POLEPOX-AQUA UV 1K is a single component and does not require mixing.
- Application of Primer: Applied using a brush, roller, or suitable spraying machine in the amounts specified in the consumption table.
- Conditions: If ambient and surface temperatures are below +5°C or above +30°C, appropriate temperatures should be awaited.
- Protection: For exterior applications, protect the surface from sun, wind, frost, or rain for the first 24 hours. Do not apply during rain or if rain is expected.
- Reaction Times: Reaction slows at low temperatures, prolonging working time. High temperatures accelerate the reaction. Temperatures should not fall below the minimum allowable limit for proper curing.
Cleaning Tools: Tools and equipment should be cleaned with soapy warm water after use. Hardened material can be mechanically removed with an appropriate solvent.
TECHNICAL SPECIFICATIONS
Specification Data Structure of the Material Water Base Color (Wet/Dry) White, Red, Grey, Green Consistence Roller and Brush Consistency Density $1.45\text{ g/cm}^3$ Application Floor Temperature $+5^{\circ}C$ to $+30^{\circ}C$ Service Temperature $-30^{\circ}C$ to $+80^{\circ}C$ Decking Waiting Time 4 hours ($20^{\circ}C$) Average Consumption $1.5\text{ kg/m}^2$ (for 1 mm dry film thickness) Elongation 500%
PACKAGING AND STORAGE
- Packaging: 20-liter plastic bucket.
- Storage: Store in unopened original packaging in a cool, dry environment protected from frost. Pallets must not be stacked and should follow a "first-in, first-out" system.
- Shelf Life: 12 months in unopened packages.
SAFETY RECOMMENDATIONS
Habitual preventive measures for chemical products should be observed. Wash hands thoroughly after work; do not consume food or drinks or smoke in the application area. Dispose of the product and its container according to local laws.
-
-
-
-
For high-strength surfaces that combine aesthetics,
