POLEPOX-UNIPRIMER
Acrylic Emulsion Based Concentrate Primer. It is a water-based, one component, transparent, universal primer suitable for inner and outer surfaces.
Areas of Usage
- In all kinds of cement mortars.
- In plasters and screeds.
- In mortars of tiles and ceramic adhesives.
- Repair mortars, cold joints.
- In places where needed adherence in concrete repairs.
- In pre-plastering applications.
- To be used as a primer before waterproofing applications.
Application Instructions
Surface preparation:
- Before application, swollen, loose and unhealthy looking surfaces should be scrapped, oil and dirt should be wiped off with water.
- If the salt release continues on the surface, the application should not be carried out until the causes are eliminated.
Application method:
- POLEPOX-UNIPRIMER is mixed thoroughly until it is homogenous before use.
- Diluted with water 7 times by volume.
- It is impregnated to the surface by brush or roller as a single layer.
- The paint or insulation product application should be after a minimum drying time of 4 hours.
Technical Data
Parameter Value Density (25°C, g/mL) 1,00 ± 0,10 pH (25°C) 7.0 – 9.0 Viscosity (25°C, mPa.s) 8000 – 10000 Solid content (% Weight) 50 ± 2 Water transmission rate (kg/ m2. h0,5) < 0,1 CLASS W3 Adhesion strength by pull-off test (N/mm²) Crack bridging flexible systems without trafficking ≥ 0,8; with trafficking 1.5 N/mm² Permeability to water vapour (m) 5 ≤ SD ≤ 50 CLASS II Touch-free Drying 30 minutes Through-dry time 4 hours Class of fire reaction B S1 d0 Color Transparent Application Horizontal / Vertical Surface humidity Dry surface Dilution ratio 1: 7 (1 Part Universal Primer: 7 Part Water) Product usage 1 layer primer application Product consumption 100 – 200 g/m² (diluted, variable according to the absorbency of the surface) Package 30 KG
SAFETY PRECAUTIONS
APPLICATION PROCEDURE
ATTENTION
-
-
-
-
For high-strength surfaces that combine aesthetics,
