POLEPOX-UNIVERSAL PR
It is a two component solventless prime for use with polyurethane based products. It is fast-curing and non-toxic (has zero V.O.C.). POLEPOX UNIVERSAL PR is ideal for use in cold climates or low humidity conditions.
AREAS OF USAGE
- Humid, moist concrete.
- Damp and wet concrete.
- Application under conditions of insufficient ventilation.
- Water tanks made of concrete, steel or other materials.
ADVANTAGES
- Excellent adhesion to almost any type of surface.
- Solvent-less: Suitable for application in closed spaces.
- Highly hydrophobic.
- Cures even at low temperatures and on wet concrete.
- Exhibits effective resistance against chemicals.
TECHNICAL & APPLICATION TABLE
PROPERTY DETAIL Consumption 100-200 gr/m2, subject to substrate porosity. (Do not exceed 200 gr/m2) Packaging 15 kg (comp. A: 9 kg, comp. B: 6 kg) Shelf Life 1 year for Components A and B when stored properly in original unopened container Mix Ratio Specified quantities (A:9kg, B:6kg) Mixing Speed Minimum 3 minutes with mechanical mixer at 300 d/min Application Temp. Product temperature should not be less than 15°C
SURFACE PREPARATION
Clean the surface using a high pressure washer, if possible. Remove oil, grease and wax contaminants. If used for concrete sealing, cement laitance, loose particles, mould release agents, cured membranes must also be removed. Fill surface irregularities with the necessary product. If there are surface irregularities which need to be filled, charge POLEPOX UNIVERSAL PR with sand.
MIXING
It is a two-component product and it should, therefore, be prepared at the mix ratio specified for the quantity to be used, taking into consideration the pot life. For a homogenous mixture, make sure that the product temperature should not be less than 15°C. Components A and B should be stirred by using a mechanical mixer for minimum 3 minutes with speed of 300 d/min until you have a homogenous mixture. Make sure the prepared mixture is consumed during the pot life of the mixture.
STORAGE
The material should be stored in cool and dry place. Shelf life of the product is 1 year for Components A and B when stored properly in the original container unopened.
-
-
-
-
For high-strength surfaces that combine aesthetics,
