POLEPOX-EPX 381
Solvent-free, 2-component grout consisting of a combination of special graded aggregates and high-strength epoxy resins. It is an epoxy mortar that can be applied on concrete, stone, mortar, steel, aluminum, asbestos cement, polyester, wood and epoxy-based materials.
APPLICATION AREAS
- In anchoring works.
- Under crane rail installation.
- On bridge supports.
- In repairing aircraft and helicopter tracks.
- To fix steel columns and poles.
- On the basis of all kinds of industrial machines, under the bearings.
- In engineering structures such as metro, highways, dams.
- For repair of sections where reinforced concrete curtains are joined to the beam, in strengthening projects.
- For installation of prefabricated elements.
TECHNICAL SPECIFICATIONS
Specification Value Technical Specification Code POLEPOX-EPX 381 Number of Components 2 Density (Mixing) 1.45 +/- 0.05 g/cm3 (20°C, TS EN ISO 2811-1) Solid Content (%) 100% by Weight Shore D 75 Application Thinner Not Thinned Weight Ratio A / B : 50 / 50 Shelf Life (Pot Life) 30 Minutes / 23°C (200 g, DIN 16945) Application Type Trowel Consumption 1.5 kg for a thickness of 1 mm
DRYING TIME
Temperature Pedestrian Traction Mechanical Chemical Strength +10°C 72 hours 5 days 10 days +20°C 24 hours 4 days 7 day +30°C 18 hours 2 days 5 days
DECKING WAITING TIME
Temperature Is At Least At Most +10°C 30 hours 3 days +20°C 24 hours 2 days +30°C 16 hours 1 day
MECHANICAL STRENGTH
- Compressive Strength (N/mm2): ~50 (DIN EN196)
- Structural Strength (N/mm2): >1.5 (Concrete Surface) (EN 1542, EN ISO 4624, EN 12118)
- Bending Strength (N/mm2): ~25 (DIN EN196)
FEATURES AND BENEFITS
- It does not shrink, it shows high fluidity.
- Resistant to oils and acids.
- Non-toxic.
- It's waterproof.
- It is resistant to freezing and thawing, and against various chemicals.
APPLICATION INSTRUCTIONS
- Surface Preparation: Surfaces must be clean, smooth, solid, free from any anti-adhesive substance such as dust, oil, dirt, rust, mold oil, detergent and waste. The concrete floor should not have water accumulation; it should be a dry floor. Surface should be prepared using suitable mechanical techniques such as high pressure water jetting, roughening, or sandblasting.
- Mixing: Pour component B into component A. Mix with a low speed electric stirrer until the mixture reaches a completely homogeneous appearance.
- Application: The prepared mixture should be placed within 5 minutes depending on the air temperature.
- Packaging: 5+5 kg Set.
-
-
-
For high-strength surfaces that combine aesthetics,
