POLEPOX-CA 100 PR
One-component, multi-purpose, acrylic copolymer-based dispersion for priming concrete or mortar surfaces prior to mortar application. This is a single-component, alkali-resistant, synthetic resin-based primer used to prime concrete or mortar surfaces before applying mortar and satin paint.
AREAS OF USAGE
- In all kinds of cement mortars.
- In plasters and screeds.
- In mortars of tiles and ceramic adhesives.
- Repair mortars, cold joints.
- In places where needed adherence in concrete repairs.
- In pre-plastering applications.
- To be used as a primer before waterproofing applications.
- As a primer for cement based boards, gypsum based panels and concrete panels.
FEATURES AND BENEFITS
- Effectively closes concrete surfaces in a single step, economically by preventing air bubbles in self-levelling and water loss into the surface.
- Useful for indoor and outdoor areas and humid areas.
- Solvent-free.
- Odorless.
- Chlorine-free, it does not damage the reinforcement.
- Easy to use.
APPLICATION INSTRUCTIONS
- Surface Preparation: Before application, swollen, loose and unhealthy looking surfaces should be scrapped, oil and dirt should be wiped off with water. If the salt release continues on the surface, the application should not be carried out until the causes are eliminated.
- Application Method: POLEPOX-CA 100 PR is mixed thoroughly until it is homogenous before use, and diluted with water 7 times by volume. It is impregnated to the surface by brush or roller as a single layer. The paint or insulation product application should be after a minimum drying time of 4 hours.
TECHNICAL DATA
Description Value Density (25°C, g/mL) 1.00 +/- 0.10 pH (25°C) 7.0 - 9.0 Viscosity (25°C, mPa.s) 8000 - 10000 Solid content (% Weight) 50 +/- 2 Water transmission rate (kg/m2. h0.5) < 0.1 CLASS W3 Adhesion strength by pull-off test (N/mm2) Flexible systems without trafficking >= 0.8 Adhesion strength (with trafficking) 1.5 N/mm2 Permeability to water vapour (m) 5 <= SD <= 50 CLASS II Touch-free Drying 30 minutes Through-dry time 4 hours Class of fire reaction B S1 d0 Color Transparent Application Horizontal / Vertical Surface humidity Dry surface Dilution ratio 1:7 (1 Part Universal Primer: 7 Part Water) Product usage 1 layer primer application Product consumption (Acc. to absorbency) 100 - 200 g/m2 (diluted) Package 30 KG
Technical data are approximate values obtained from the laboratory study of Polepox Polimer for finished products obtained at +20°C air temperature and 50% relative air humidity and valid for its performance after 28 days
APPLICATION PROCEDURE
ATTENTION
-
-
-
-
For high-strength surfaces that combine aesthetics,
