POLEPOX-CA 3000 PVA
POLEPOX-CA 3000 PVA is a high-performance PVA-based product designed for use as a surface sealer, bonding agent, and admixture for cement and mortar.
FEATURES
- Bonds effectively to most common construction materials, excluding PVC, rubber, and similar products.
- Highly versatile product that enhances adhesion and increases overall strength.
- Provides a plasticizing effect that improves mortar application and increases mechanical strength of renders and screeds.
- Reduces shrinkage and ensures perfect adhesion even on smooth concrete surfaces.
APPLICATION AREAS
- Provides enhanced bond strength to mortars, specifically topping mortars.
- Improves the wear resistance of screeds compared to conventional sand and cement mixtures.
- Resulting surfaces are dust-free and resistant to water, oil, and grease.
- When used with suitable fillers, it is ideal for fixing plasterboard, ceramic tiles, and marbles.
- Functions as a surface sealer for concrete floors to minimize dusting and oil penetration.
- Serves as an effective primer for various decorative coatings.
APPLICATION INSTRUCTIONS
- Surface Preparation: Surfaces must be sound and free from all contaminants such as oil, grease, and paint.
- Bonding Paste: Create a paste by diluting POLEPOX-CA 3000 PVA with equal parts of water, cement, and fine sand. This can be used as an adhesive for fixing plasterboards or polystyrene tiles to walls and ceilings.
- Priming: For highly porous surfaces, apply a primer coat mixed at a 1:3 ratio (PVA to water).
- Application: Apply the bonding coat followed by the normal application of render, screed, or plaster. Use the same method for bonding new concrete to old concrete.
- Heavy Renderings: Prepare a render coat using 1 part cement, 1 part sand, and 1 part product to 3 parts water. Apply to the tacky prime coat at a recommended dosage of 10-15 L per 100 kg of cement.
SAFETY AND STORAGE
- Stir the contents thoroughly before use.
- Store in a cool, dry place away from heat and direct sunlight. In tropical climates, air-conditioned storage is recommended.
- Wear protective clothing, gloves, and goggles. In case of splashes to skin or eyes, rinse immediately with fresh water. If swallowed, do not induce vomiting and seek medical assistance immediately.
TECHNICAL DATA
General Information Values Appearance White viscous liquid Density 1.06 +/- 0.05 Packaging 5-20 L pail & 200 L drum Shelf Life 12 months in unopened original packaging Solid Content (%) 30 +/- 3 Render Coat Dosage 10 - 15 L / 100 kg cement Temperature of the Floor of Application +5°C to +45°C Drying Time 45 - 60 min Full Drying Time 24 hours
Technical data are approximate values obtained at +20°C air temperature and 50% relative humidity.
ATTENTION
-
-
-
-
For high-strength surfaces that combine aesthetics,
