POLEPOX- POLYUREA HB
Two-component, solvent-free, fast-curing, hybrid polyurea-based waterproofing membrane with crack-bridging properties. Thanks to its chemical structure, it cures very quickly and is suitable for use in all weather conditions.
Recommended Use
- Oil and Natural Gas Piping Liner & Tanks.
- Airports and Refineries.
- Fertilizer Plants and Mining Operations.
- Food Processing Plants and Marine Environments.
- Secondary Containment.
- Water and Waste Water Treatment.
- Industrial and Manufacturing Facilities.
- Power Plants and Warehouse Floors.
- Cold Storage Facilities.
- Landfill Containment.
- Parking Garage Decks.
Features
- Zero VOC (100% Solids).
- Excellent Thermal Stability.
- Low Temperature Flexibility.
- Good Chemical Resistance.
- Coats Carbon or Mild Steel Metals without Primer.
- Seamless and Odorless.
Technical Data
PROPERTY VALUE / METHOD Mix Ratio By Volume 1A : 1B Pot Life @ 65.5°C 5 - 8 sec Tack Free Time (Substrate dependent) 45 - 60 sec Recoat Time 0 - 6 sec Density (Combined) 1.07 - 1.12 Hardness (ASTM D-2240) SHORE A 70-75 / D 35-40 Tear Resistance (ASTM D-624) 55 - 60 Elongation (ASTM D-412) 400% ± 30% Service Temperature (Dry) -40°F to 250°F Service Temperature (Wet) -40°F to 120°F VOC Content 0 gm/lit Return to Service (Foot traffic) 1 - 4 hours Return to Service (Vehicle traffic) > 24 hours Recommended Applied Thickness > 2 mm Taber Abrasion Resistance (ASTM D4060) > 75 Water Absorption (ASTM D 471) < 0.5% loss Pull Off-Strength (Concrete) > 400 psi (Excellent) Lineal Shrinkage 1 - 2% Weather Test (QUV 3000 hrs) No cracking; color change and gloss reduction observed
Application Procedure
Mixing: POLEPOX POLYUREA HB may not be diluted under any circumstances. Thoroughly mix Part-A (Resin side) with air-driven power equipment until a homogeneous mixture and color is obtained.
Application Conditions: Both Side-A and Side-B materials should be preconditioned to 25°C before application. Recommended surface temperature must be at least 3°C above the dew point. Apply using heated, high-pressure 1:1 spray mixing equipment such as Graco’s Reactor. Spray at a minimum of 2000 psi and at temperatures above 66°C.
Packaging and Storage
- Packaging: 420 KG Set (Component A: 200 KG, Component B: 220 KG).
- Shelf Life: One (1) year from date of manufacture in factory-sealed containers.
- Storage: Store drums above 15°C and avoid freezing. Use wooden pallets to avoid direct contact with the ground. Rotate drums regularly if stored for a long period.
ATTENTION
-
-
-
-
For high-strength surfaces that combine aesthetics,
