POLEPOX - PUR CD 2K
Two-component, fast-curing, polyurea-based coating system developed for waterproofing. Specifically designed for application with a roller or trowel, it offers excellent elasticity and a specially formulated polymerized profile to enhance adhesion. It is an ideal product for environments requiring high levels of wear and impact resistance. For use in open areas, a PU-based flexible (aliphatic) paint must be applied as a topcoat.
Features and Advantages
- Fast curing in all weather conditions.
- Excellent thermal resistance.
- Simple application using a brush or roller.
- No need for high-cost machines or specialized equipment.
- Forms a seamless membrane without joints when applied.
- Hydrophobic elastomeric-based.
- Provides water vapor permeability, allowing the surface to breathe.
- Easily repaired locally within minutes if damaged.
- Resistance to chemicals.
- Maintains mechanical properties over a temperature span of -40°C to +90°C.
Typical Applications
- Terraces and balconies.
- Bridges and tunnels.
- Wet areas.
- Foundations.
- Undertile applications.
- Concrete structures.
Surface Preparation and Priming
Surface Preparation: All surfaces must be free of oil, grease, and moisture before application. Clean the surface using a high-pressure washer to remove oil, grease, wax contaminants, cement laitance, loose particles, and mould release agents. Fill surface irregularities with appropriate products.
Priming: Prime absorbent and brittle concrete or cement screed with POLYURETHANE PRIMER or POLEPOX EPX101 PRIMER (concrete moisture should not exceed 5%). A moisture barrier is suggested for damp concrete. Prime non-absorbent surfaces like metal, ceramic tiles, and old coatings with POLEPOX PU PRIMER 100.
Application Procedure
Mix the components with a low-speed mixer for a few minutes before use. Add component B into component A and stir at low speed for 3 to 5 minutes. Apply the mixture to the primed surface with a brush or roller in one or two layers. If required, a second layer can be applied 3 hours after the first layer. Do not exceed 3-4 hours between each coat.
Specification Data
| PROPERTIES BEFORE APPLICATION | UNIT / METHOD | PROPERTY |
|---|---|---|
| Viscosity | ASTM D2196-86, 25°C (CP) | 1400 |
| Pot life | Minute | 20 - 30 |
| Drying Time | Minute | 120 |
| Full cured | Day | 7 |
| PROPERTIES AFTER APPLICATION | UNIT | METHOD | PROPERTY |
|---|---|---|---|
| Hardness | Shore A | ASTM D2240/DIN | 80 |
| Tensile Force at Break (+23°C) | N/mm2 | ASTM D 412 | 12 |
| Elongation Percentage (+23°C) | % | ASTM D 412 | 1200 |
| Application Temperature | °C | - | +5 to +30 |
| Adherence on Concrete (+23°C) | N/mm2 | TSE EN 1542 | >= 2,2 |
Consumption: One layer is sufficient. Total consumption min. 1.50 - 2.0 kg/m².
Packaging: Component A (8 kg) + Component B (4 kg) in sealed pails.
Shelf Life: Minimum 12 months in original sealed pails in dry places at temperatures of +5°C and +25°C. Use as soon as possible once opened.
ATTENTION
-
-
-
-
For high-strength surfaces that combine aesthetics,
