POLEPOX-ACR POLİSH
Acrylic-based, high-performance, dusting-preventive, multi-use concrete varnish, insulation and protection material.
Areas of Usage
- To protect surfaces with concrete and other cement on buildings and infrastructures,
- For grounds and walls with bright appearance demand,
- To increase service life of concrete,
- To freshen up bright, colorless and surface which is ready to use for concrete surfaces with apparent aggregate,
- Surfaces where surface hardener has been applied,
- Screed concretes,
- Concrete pouring in hot climates.
Features and Benefits
It avoids dusting as it increases wearing resistance of surface.
It is easy to apply as it is one-component.
It ensures concrete is resistant against chlorine.
It dries faster as the solvent within evaporates very quickly.
As it increases sealing, it avoids cracks occurring as a result of liquid frost.
- It is used as a polish thanks to the bright film layer it forms.
- It protects concrete against atmospheric effects which can penetrate as salt or gases into concrete.
- It decreases dirt retention and the color of concrete doesn't change with rain effect.
Application Instructions
Surface Quality: Surface must be cleared of loose particles and cleaned from any kind of materials avoiding adhesion, such as dust, dirt and oil.
Surface Preparation: Exposed concretes in open areas without a coating should have a firm and dry surface and be cleared of loose particles. Convenient surface preparation methods include cleaning with vapor, high-pressure water or roughening.
Application: POLEPOX-ACR POLISH is ready to use. Do not apply when rain is expected. Resolving salt or sea water splashes may cause brightness loss or color change.
Curing Phase: It does not require a special cure treatment; it should only be protected from rain for at least 1 hour at approximately +20°C (it becomes dust-resistant in 30 minutes).
Mixing and Equipment: Mix well before application and after opening the package. It can be applied manually by brush or short-pile roller, or by automatic spraying machines. Immediately after application, before it hardens, equipment should be cleaned with thinner.
Application Notes / Restrictions
- Immediately after application, used equipment and areas contacting the skin should be cleaned with warm water and detergent.
- Product may irritate the skin. Protective gloves and goggles should be used. Protective cream may be applied to hands before starting work.
- In case of mortar contacting the eyes, they should be washed with warm water immediately and medical support should be sought.
- As the material includes solvent, contact with skin and eyes should be avoided; wash with plenty of water in case of contact and seek medical support. Protective gloves and goggles should be used and material should not be inhaled.
- As it is a flammable material including solvent, smoking is strictly forbidden; keep away from any fire source such as welding or cutting machines.
- In applications carried out in closed spaces, the implementer should rest in an open area for a certain period approximately every 30 minutes.
Technical Data
| General Information | Values |
|---|---|
| Color | Transparent Liquid |
| Package | 15 kg |
| Shelf Life | 12 months in unopened original package |
| Flashing Point | +90°C |
| Density (kg/lt) | 0.92 (±0.03) |
| Application Information | Values |
|---|---|
| Pot Life | 2 hours |
| Consumption (Brush, Roller) | 0.100 - 0.200 liter/m² |
| Consumption (Spraying) | 0.150 - 0.250 liter/m² |
| Surface Application Temp. | (+5°C) - (+35°C) |
| Dry Film Thickness | 135 (±15.00) micron |
| Complete Cure | 5 days |
| Standards | In accordance with ASTM C 309-81 |
Note: Technical data are approximate values obtained at +20°C air temperature and 50% relative air humidity, valid for performance after 28 days.
ATTENTION
-
-
-
-
For high-strength surfaces that combine aesthetics,
