POLEPOX-PU PAİNT UV 1K
one-component, polyacrylate polyurethane resin-based floor paint characterized by its fast-drying properties and high physical strength. It is easy to apply and ready to use, providing high resistance against impacts, abrasions, and UV rays. It is suitable for areas open to vehicle and pedestrian traffic.
USAGE AREAS
- Applicable on many floors such as concrete, screed, parquet, and brick.
- Industrial floors such as factories and production facilities where vehicles, trucks, vans, forklifts, and pallet trucks are used.
- Multi-use areas such as warehouses, hangars, workplaces, and households.
- Areas open to vehicle traffic such as parking lots.
- Repair shops, schools, sports grounds, car washes, fuel oil stations, logistics loading areas, and ramps.
- Can be used for pedestrian and vehicle coloring in warning areas and surfaces open to traffic.
ADVANTAGES
- Prevents the physical wear of the surface and increases friction resistance.
- High adhesion strength; does not break, crack, swell, or rise from the surface.
- Single component formulation for fast and easy application with a brush or roller.
- Resistant to sunlight, UV rays, and freezing-thawing effects.
- Provides 100% waterproofing in areas where it is applied correctly.
- Prevents dusting in the applied area and provides a non-slip surface.
APPLICATION INFORMATION
Surface Preparation:
- The application surface must be dry and clean.
- All debris and components such as oil, dirt, rust, or dust that prevent adhesion must be removed.
- Any irregularities on the surface must be fixed; the surface must be clean, smooth, and durable before application.
Application Instructions:
- After mixing POLEPOX-PU PAINT UV 1K, apply it in thin layers on the dry and clean ground in 1 layer.
- Application can be performed using a brush, roller, or spray equipment.
Warning and Suggestions:
- Ensure the application surface is dry.
- Do not apply outside of the standards specified in the technical data sheet.
- Do not apply the product in thick layers.
TECHNICAL SPECIFICATIONS
Specification Value / Data Density 1.30 kg/lt (25°C) Elasticity Semi flexible Solids Ratio 75% (By Weight) Water Transfer Rate <0.1 kg/(m².h) Class W3 Crack Bridging 2 mm Shore A Hardness ~60 (DIN EN ISO 868) Application Ambient Temp. Between +5°C and +30°C / +35°C Cured Product Temp. Resistance Between -40°C to +70°C Consumption 0.2 - 0.25 kg/m² Packaging 20 Kg
APPLICATION PROCEDURE
ATTENTION
-
-
-
-
For high-strength surfaces that combine aesthetics,
