POLEPOX-PU TC 1K
one-component, polyacrylate polyurethane resin-based floor paint characterized by its fast-drying properties and high physical strength. It is easy to apply and ready to use, providing high resistance to UV rays, impacts, and abrasions. It is specifically designed for areas open to vehicle and pedestrian traffic.
USAGE AREAS
- Applicable on many floors such as concrete, screed, parquet, and brick.
- Industrial floors such as factories and production facilities using trucks, forklifts, and pallet trucks.
- High-traffic areas including warehouses, hangars, workplaces, and households.
- Vehicle traffic zones such as parking lots.
- Specialized facilities like repair shops, schools, sports grounds, car washes, fuel stations, and logistics loading ramps.
- Warning areas and traffic zones for pedestrian and vehicle path coloring.
ADVANTAGES
- Prevents physical wear of the surface and increases friction resistance.
- Offers high adhesion strength; does not break, crack, swell, or lift from the surface.
- Single-component formulation allows for fast and easy application by brush or roller.
- Resistant to sunlight, UV radiation, and freezing-thawing effects.
- Provides 100% waterproofing when applied correctly.
- Prevents dusting in the application area and provides non-slip properties.
APPLICATION INFORMATION
Substrate Preparation:
- The application surface must be dry and clean.
- All debris and contaminants such as oil, dirt, rust, or dust that prevent adhesion must be removed.
- Any surface irregularities must be fixed; the surface must be clean, smooth, and durable before application.
Application Instructions:
- After mixing POLEPOX-PU TC 1K, apply it in 2 thin layers on the dry and clean ground.
- Application can be performed using a brush, roller, or spray equipment.
Application Conditions:
- Ambient temperature should be between $+5^{\circ}C$ and $+30^{\circ}C$.
- Ensure the application surface remains dry.
- Do not apply outside the standards specified in the technical sheet or in thick layers.
TECHNICAL SPECIFICATIONS
Specification Value / Data Density $1.30\text{ kg/lt}$ ($25^{\circ}C$) Elasticity Semi flexible Solids Ratio 75% (By Weight) Water Transfer Rate $<0.1\text{ kg/(m}^2\text{.h)}$ Class W3 Crack Bridging $2\text{ mm}$ Shore A Hardness ~60 (DIN EN ISO 868) Ambient Temp. (Application) Between $+5^{\circ}C$ to $+35^{\circ}C$ Temp. Resistance (Cured) Between $-40^{\circ}C$ to $+70^{\circ}C$ Consumption $0,2 - 0,25\text{ kg/m}^2$
APPLICATION PROCEDURE
ATTENTION
-
-
-
-
For high-strength surfaces that combine aesthetics,
