POLEPOX-EPX 355 ATC
It is a solvent-free self-leveling epoxy-based floor covering material with high mechanical strength and chemical resistance. There is no fiber layer on the surface.
Scope of Application It can be applied in aircraft hangars, automobile factories, health sector related laboratories, painting workshops, electrical and electronics laboratories.
Features It has very good resistance to chemicals, is resistant to friction and abrasion. It allows the static sieve formed on the surface to reach the conductors in the lower layer and reach the soil. It is non-fibrous. It creates a smooth surface, is easy to clean, hygienic, does not require maintenance for a long time, is easy to apply, does not contain solvents.
Technical Specifications
Specification Value Code POLEPOX-EPX 355 A Number of Components 2 Density (Mixture) 1.40-1.50 g/cm³ 20°C TS EN ISO 2811-1 Solid Mixture (%) 100 by Weight: 100 by Volume Shore D 85- ASTM D 2240, DIN 53505 Application Thinner Not Thinned Mixing Ratio (By Weight) A/B :80/20 Mixture Life 30-40 Minutes /23°C,200g. DIN 16945 Coefficient of Electrical conductivity 7.5x10⁵ - 3.5x10⁷ (DIN EN 61340-5-1, DIN EN 61340-5-2) Method of Application Trowel, Rakel Consumption 1.4 kg for a thickness of 1 mm
Drying Time
Drying Type Value Powder Drying 3-4 hours at 23°C TS 4317 Touch Drying 10-12 hours at 23°C TS 4317 Full Drying 7 days at 23°C TS 4317
Mechanical Strength
Specification Value Standard Compressive Strength (N/mm²) 55~60 DIN 53504 TS 1967 Tensile Strength (N/mm²) 20~25 DIN 53504 TS 1967 Tensile Elongation (%) 0.8-1.0 DIN 53504 TS 1967 Bending Strength (N/mm²) 10~12 DIN 52371 TS 985 E-Module (N/mm²) 18~20 DIN 52371 TS 985 Abrasion Resistance (mg) ~30 Taber, ASTM D 4060-95
Method of Application
The weak parts of the surfaces to be applied should be cleaned by milling, sand blasting or sanding. If the surface is too bright, it should be roughened again with a milling cutter or sandblasting and the specific surface should be increased. If there is oil on the surface, it should be burned, dirt and dust should be removed by vacuum. The cleaned surfaces are primed with a Solvent-Free Epoxy Conductive Primer (POLEPOX-EPX 303). No later than 24 hours after primer application, Copper busbars are glued to the floor to form 0.5x0.5 m squares. After physical contact with each other, the Solvent-free Epoxy Conductor is applied with a Self-Leveling (POLEPOX-EPX 355 A) trowel. And with a hedgehog roll, gas bubbles are removed and left to dry.
Packing Shape
A/B = 20+5 = 25 kg suit
Storage Information
The covers of the product packaging should be closed and the label information should be complete. The expiration date should be followed by paying attention to the first-in, first-out rule. Storage conditions should be dry, cool and well ventilated. The product should be stored taking into account technical safety information and legal obligations. It has a shelf life of 12 months at 15-25°C, in a closed warehouse without moisture, in its original unopened packaging.
Health and Safety
Please pay attention to the safety signs and warnings indicated on the packaging. Prepared products related to international standards (EC-Directive 2001/58/EC) was prepared by a technical team certified in accordance with the Product Safety Data Sheet (MSDS) information specified in health and safety should be followed. Adequate ventilation should be provided during application.
Note
The above information has been prepared for professional users taking into account laboratory studies and field application studies. It is recommended that our Technical Service be consulted for organization-specific applications and new design studies. Our company is not responsible for improper conditions and work that is not under our control.
-
-
For high-strength surfaces that combine aesthetics,
