POLEPOX-EPX SL 325
It is an epoxy-based floor covering material with high mechanical strength and high chemical resistance that can self-spread without solvents.
FEATURES / ADVANTAGES
Excellent resistance to chemicals, friction, and abrasion. Creates a smooth, easy-to-clean, and hygienic surface. It does not require maintenance for a long time, is easy to apply, and contains no solvents.
APPLICATION AREAS
Ideal for factories, warehouses, shopping centers, workshops, aircraft hangars, schools, hospitals, pharmaceutical and food industries, laboratories, parking lots, and areas with heavy forklift traffic or corrosive chemicals.
TECHNICAL SPECIFICATIONS
Specification Value Product Code POLEPOX-EPX SL 325 Number of Components 2 Density (Mixture) $1.42 \pm 0.05 \text{ g/cm}^3$ ($20^\circ\text{C}$ TS EN ISO 2811-1) Solid Mixture (%) 100% by Weight Shore D Hardness 80 Application Thinner Not Thinned Mixing Ratio By Weight: A/B : 100/20 Mixture Life 40 Minutes ($23^\circ\text{C}$, 200g. DIN 16945) Method of Application Trowel Consumption 1.3 kg for a thickness of 1 mm
DRYING AND WAITING TIMES
Temperature Pedestrian Traffic Mechanical Strength Chemical Resistance $+10^\circ\text{C}$ 72 hours 5 days 10 days $+20^\circ\text{C}$ 24 hours 4 days 7 days $+30^\circ\text{C}$ 18 hours 2 days 5 days Temperature Minimum Waiting Time Maximum Waiting Time $+10^\circ\text{C}$ 30 hours 3 days $+20^\circ\text{C}$ 24 hours 2 days $+30^\circ\text{C}$ 16 hours 1 day
MECHANICAL STRENGTH
Parameter Value / Standard Compressive Strength ~50 $N/mm^2$ (DIN EN 196) Adhesion Strength $>1.5 N/mm^2$ (Concrete Surface) (EN 1542, EN ISO 4624) Bending Strength ~25 $N/mm^2$ (DIN EN 196) Shore D 80 Wear Resistance 70mg (CS 10/1000/1000) (8 days/$+23^\circ\text{C}$) (DIN 53 109)
APPLICATION CONDITIONS
Parameter Condition Surface & Ambient Temperature Min $+10^\circ\text{C}$ / Max $+30^\circ\text{C}$ Material Temperature Between $+10^\circ\text{C}$ and $+30^\circ\text{C}$ Surface Moisture Content Max 4% Relative Humidity Max 80% Dew Point Floor temp must be at least $3^\circ\text{C}$ above dew point
SURFACE PREPARATION & APPLICATION INSTRUCTIONS
- Sheet Metal Surfaces: Sandblasting at SA 2 ½ level is required for peak performance. Prime with an epoxy primer rich in zinc powder or zinc phosphate.
- Concrete Surfaces: Must be clean, solid, and have compressive strength $>25 N/mm^2$ and tensile strength $>1.5 N/mm^2$. Remove cement grout/sorbet (Shot-Blast, etc.). Concrete should be at least C25 standard.
- Mixing: Mix Component A with a low-speed mechanical mixer until homogeneous. Add Component B and mix for 2 minutes.
- Application: Pour the mixture onto the primed surface and spread with a notched trowel. Use a hedgehog roller to eject trapped air. Consume within 40 minutes.
-
-
-
For high-strength surfaces that combine aesthetics,
