POLEPOX-EPX 367
It is a solvent-free, epoxy-based, semi-gloss floor paint with high mechanical strength and chemical resistance to acids.
Features / Advantages
It has excellent resistance to chemicals, resistance to friction and abrasion, creates a smooth surface, easy to clean, hygienic, does not require long-term maintenance, easy to apply, does not contain solvents.
Application Areas
Factories, warehouses, shopping centers, workshops, aircraft hangars, schools, hospitals, pharmaceutical industry, food industry, laboratories, parking lots, water treatment plants, heavy forklift and can be applied in areas where corrosive chemicals are used.
Technical Specifications
Specification Value Code POLEPOX-EPX 367 Number of Components 2 Density (Mixing) 1.25-1.35±0.05 g/cm³ 20°C TS EN ISO 2811-1 Solid Content (%) 100 by Weight Shore D 85 ASTM D 2240, DIN 53505 Application Thinner Not Thinned Weight Ratio A/B :4/1 Shelf Life 30-40 Minutes / 23°C, 200 g. DIN 16945 Application Type Trowel
Drying Time
Temperature Pedestrian Traction Mechanical Strength Chemical Strength +10 °C 72 hours 5 days 10 days +20 °C 24 hours 4 days 7 days +30 °C 18 hours 2 days 5 days
Decking Waiting Time
Temperature Minimum Maximum +10 °C 30 hours 3 days +20 °C 24 hours 2 days +30 °C 16 hours 1 day
Mechanical Strength
Specification Value Compressive Strength (N/mm²)(DIN EN196) ~50 Structural Strength (N/mm²) (EN 1542, EN ISO 4624, EN 12118) >1.5 (Concrete Surface) Bending Strength (N/mm²)(DIN EN196) ~25 Temperature Resistance (DIN 53 109 (Taber Temperature Test)) 70mg((CS 10/1000/1000) (8days/+23°C)
Surface Preparation
To achieve the highest level of performance, sandblasting should be carried out at the Tu 2 1/2 level. The sandblasted surface should be primed with an epoxy primer rich in zinc powder or an epoxy primer rich in zinc phosphate, as well as the necessary dry lm, taking into account the product Information.
For concrete surfaces, the concrete surface should be clean, firm and have sufficient compressive strength (>25N/mm2), tensile strength >1.5N/mm2. The concrete floor to be insulated must be solid there should be no play on the surface. The coating layer on the surface must be removed without fail. The concrete to be insulated must be at least C25, preferably C30 - C35 standart.
Packaging
A+B: 20+5=25 kg SET
Storage Information
The covers of the product packaging should be closed and the label information should be complete. The expiration date should be followed by paying attention to the first-in, first-out rule. Storage conditions should be dry, cool and well ventilated. The product should be stored taking into account technical safety information and legal obligations. It has a shelf life of 12 months at 15-25°C, in a closed warehouse without moisture, in its original unopened packaging.
Health And Safety
Please pay attention to the safety signs and warnings indicated on the packaging. Prepared products related to international standards (EC-Directive 2001/58/EC) was prepared by a technical team certified in accordance with the Product Safety Data Sheet (MSDS) information specified in health and safety should be followed. Adequate ventilation should be provided during application. Wear protective equipment such as masks, gloves. Do not contact it directly and do not inhale its vapor. Keep away from open fire sources.
For high-strength surfaces that combine aesthetics,
